Boiler replacement cost in Salt Lake City, UT

Prices for the Salt Lake Valley, Park City, Heber and Midway

What a new boiler costs installed in 2026, what moves the price, and how to get an exact number for your home.

How much does it cost to replace a boiler?

Most boiler replacements typically cost $4,500 to $11,000 installed. A like-for-like swap sits near the low end. A high-efficiency upgrade with new venting lands in the middle. One boiler that also runs radiant floors, a water tank or snowmelt lands near the top. You get a written price after we see the system.

Updated Nov 19, 2026 · Typical installed prices, not a quote

New boiler cost by job type

Where a job lands in the typical range depends mostly on what changes besides the boiler itself.

$4,500$11,000

Like-for-like swap

Low end
Same type and size of boiler. Sound venting and piping get reused.

High-efficiency upgrade

Middle
A condensing boiler with new plastic venting and a condensate drain.

One boiler, many loads

High end
Sized for house heat plus radiant floors, an indirect water tank or snowmelt. Can run past $11,000.

Big heated driveway? It often needs its own snowmelt boiler, priced as its own project. See heated driveways.

Boiler installation cost: what's included

Compare quotes line by line. Two prices can look far apart when one includes venting and the other doesn't.

Usually in the price

  • The new boiler and its controls
  • Taking out the old boiler
  • Piping, pumps and valves at the boiler
  • Venting to code
  • Filling, purging air and startup
  • A walkthrough of the new controls

Can add to the price

  • A new vent route or chimney liner
  • Adding zones or an indirect water tank
  • A system flush and a dirt separator
  • A bigger gas line
  • Permit fees, where the city requires one

What moves the cost to replace a boiler

Six things push a price up or down. Ask any contractor how each one applies to your home.

Boiler size

We size it to your home's heat loss, not the old boiler's label. An oversized boiler costs more and short-cycles.

How many loads it runs

Each zone, radiant loop, water tank or snowmelt loop adds piping and controls.

Venting

Moving from a chimney to a sidewall vent, or a long vent run, adds parts and labor.

Efficiency

Condensing boilers cost more up front and burn less gas every winter after.

Access

Tight mechanical rooms and crawl spaces take longer to work in.

System condition

Sludge, old fittings or a failed expansion tank get fixed during the swap so they don't hurt the new boiler.

Repair or replace your boiler?

We price both so you can compare. Common boiler repairs typically run $250 to $1,000.

Repair it if

  • The boiler is under about 15 years old
  • One part failed and it's still made
  • It heats the house without repeat lockouts
Boiler repair →

Replace it if

  • The boiler is 15 years old or more
  • The heat exchanger is cracked or failed
  • Parts are no longer made
  • Lockouts keep coming back after repairs
  • It can't keep up with house heat and snowmelt
Boiler replacement →

Boiler rebates in Utah

Enbridge Gas Utah's ThermWise program offers rebates on some high-efficiency boilers. The list and amounts change, so we check the current rebates with you before you buy.

Ask about rebates

Recent boiler replacement jobs

From Pete's field log. One is a heat exchanger swap that saved a full replacement.

All replacement posts →
New IBC boiler and indirect tank after a boiler replacement in Park City
· Park City

Failed boiler replaced with an IBC

A boiler failure left the home with no heat. We replaced it with an IBC system and got the heat back on.

  • IBC
  • Caleffi
  • Viega
Damaged heat exchanger from a Navien boiler in Park City
· Park City

Navien heat exchanger replaced

A poor earlier install had ruined the heat exchanger on a Navien boiler. We replaced it with a Navien part.

  • Navien
New boiler vent on a roof in Park City
· Park City

Worn boiler venting replaced

The boiler's venting had worn out. We replaced it.

  • Venting

Posted by Pete Savage, hydronic heating technician at Boiler Buzz.

Get your exact boiler price

A range helps you plan. A real price needs a look at your boiler, venting and zones.

  1. 1Tell us about your boilerFour quick steps in the form.
  2. 2We look at the systemHeat loss, venting, zones and anything else it heats.
  3. 3You get a written priceWith the boiler model and the full cost. No pressure to say yes.
Get your new boiler quoteQuestion 1 of 5

What are you planning?

Choose one to start.

Your info stays with Boiler Buzz. We never sell it.Prefer to talk? (435) 800-5047

Boiler replacement cost questions

What's the cheapest way to replace a boiler?

A like-for-like swap that reuses sound venting and piping. Sizing to your home's heat loss can also mean a smaller, cheaper boiler.

Does a new boiler cost more in Park City?

It can. Park City homes often run more zones, radiant floors and snowmelt from one boiler, and that pushes the price up. Combustion also has to be set for altitude.

How long does a boiler replacement take?

Most swaps take one to two days. Jobs with new venting, more zones or a second boiler can take longer.

Is a high-efficiency boiler worth the extra cost?

Usually, if you'll stay in the home. It costs more up front and uses less gas every winter. ThermWise rebates can cover part of the difference on some models.

Can a failed part be replaced instead of the whole boiler?

Sometimes. In August 2026 we replaced a damaged heat exchanger on a Navien boiler in Park City instead of the whole boiler.

Get a written price for your new boiler.

Call nowGet my quote